bat·365(中国)官方网站-登录入口

Method of safe use of industrial dust removal equipment

1. different types and specifications of the vacuum cleaner are different in their structure and function. Therefore, we must carefully read the instructions before choosing the vacuum cleaner, so as to avoid the damage of the vacuum cleaner and the danger of personal safety due to improper use.
2. industrial vacuum cleaners should be at an altitude of less than 1000 meters, good ventilation, the ambient temperature is less than 40 DEG C, non flammable, corrosive gas, dry indoor or similar environment in use in the air.
3. before use, first connect the hose to the suction port of the shell. The hose and the suction nozzle at each end and the end of the nozzle must be tightly fastened, for example, furniture brush, gap suction nozzle and floor brush. Because of the small intake air inlet of the slot, the noise is high when used, and the continuous use time should not be too long.
4. to connect the ground line to ensure the safety of electricity. The continuous use time of household vacuum cleaner does not exceed 1 hours. The industrial vacuum cleaner does not exceed 8 hours every time. It prevents the motor from overheating and burns.
5. when the vacuum cleaner equipped with the automatic winding device is used, pull the power cord out of the enough length, do not pull the power cord over the head. If the yellow or red markings are on the power line, it must be stopped. Need to rollback power line, press the button to automatically retract.
6. usually use should be careful not to make cleaner water, wet hands can not operate the machine. If it is clean, where there is a large piece of paper, paper, plastic cloth or more than Straw caliber things, should exclude them, otherwise easily lead to suction pipe blockage.
7. when using an industrial vacuum cleaner to absorb liquid material, the filter core should be removed to prolong its service life.
8. when the use is different, the suction control device can be properly adjusted. There is a circular hole on the elbow, with an adjusting ring on it. When the adjusting ring covers the hole on the elbow pipe, the suction is the largest, while the suction is the smallest when the adjusting ring exposes all the holes. Some vacuum cleaner adopts the method of motor speed regulation to adjust the suction.
9., when it is found that there are more garbage in the dust storage tank, we should remove dirt and filter on the filter while maintaining the good ventilation channel, so as to avoid blocking the filter and cause no drop in the suction, motor heating and the service life of the vacuum cleaner.
After the 10. vacuum cleaner is used for a period of time, the concentration of dust too much on the filter belt will result in the drop of suction. This time can shake the dust rack on the vacuum cleaner so that the suction will be restored. If the shakes shakes the ash frame, the suction can not be restored, which indicates that the dust in the bucket is full and should be cleared in time.
11. vacuum cleaner motor is mostly high speed motor, and the brush is easy to wear after long run. The domestic vacuum cleaner usually uses one to one year and a half to replace the brush.
After the 12. vacuum cleaner is used, it should be kept in a dry place. If it is in a place of excessive humidity, it will affect electrical insulation and service life.